Download File

Shaped fretted tray

A different, elegant option.

Fretted trays can be made in any shape, however complicated, for both exterior and interior. Multitude of combinations, possibility of vinyl graphics, adding volume to the letters, lighting, etc....

Technical information

Trays fretted on one side in aluminium are cut out at the front so that they can be illuminated by the LEDs inside. The options available have the acrylic at the front, protruding from the front, or inlaid inside. There is also the option of closing them on the back with PVC, an aluminium back-tray or a pipe support frame. They can also be manufactured in basic dibond colours or lacquered. Fabricated in aluminium with the possibility of lacquering in the desired colour. The front can have vinyl graphics.

THICKNESS:
·Standard measurements: 100mm.
·Special measurements: consult.

FINISH:
·Matte, satin or gloss.
·RAL, Pantone, NCS, metallic colours, etc...

REAR:
·10mm PVC.
·Aluminium counter-tray.

ILLUMINATION:
Interior illumination is with sealed LEDS, normally white, but it is possible to choose different colours and even RGB. They work on 12 volts, connected to a 12v/230w transformer supplied and which connects to the power supply (230w).

3D drawing

Shaped fretted tray
See more examples